|
|
Hi Kim, Please provide the version number of "previous versions" that you tested. |
|
|
Hi Bcan, I have tested this issue on BFX-UH200 and versions are below FW : 17.540.8 ATT : 240422 I will test it on BFX-AT100 and let you know the result. Thank you. Kim |
|
|
Hi Bcan, I tested ATT 230214 version on BFX-AT100 v15.541.66. When I activate ATT daemon through USB, the authentication code is still displayed number. Is this a UI issue? If yes, please explain in detail why this issue occurs. Thank you. Kim |
|
|
Hi Kim, Here are your test results. What is the result of Case C ? A. AttDaemon: 240222 FW: 15.541.66 (BFX-AT100) => It shows number B. AttDaemon: 230214 FW: 15.541.66 (BFX-AT100) => It shows number C. AttDaemon: 240422 FW: 17.540.8 (BFX-UH200) => What dose it show ? |
|
|
Hi Bcan, C. AttDaemon: 240422 FW: 17.540.8 (BFX-UH200) => It shows "*" D. AttDaemon: 230214 FW: 17.540.8 (BFX-UH200) => It shows "*" Thank you. Kim |
|
|
Hi Bcan, FYI, When I test on BFX-UH200 v17.540.8, After activate ATT damon, UI was reset and authentication code shows as "*". On BFX-AT100 v15.541.66, After activate ATT damon, UI is not reset and authentication code shows as number. Please refer it. Thank you. Kim |
|
|
Hi Bcan, Is there any update? This issue should be fixed until early this week. Please let me know the progress of this issue. Thank you. Kim |
|
|
Hi Kim, To show auth code as "*", we need 1. set the property sys.skb.hidecert as 1 2. restart com.skb.tv Currently the 2nd step failed. I am still checking it. |
|
|
Hi Bcan, This issue should be fix ASAP. Please let me know the progress. Thank you. Kim |
|
|
Hi Kim, After checking, there seems to be something wrong in the binder. We need more time to check this issue. |
|
|
Hi Bcan, If I test with the method below, it displayed as "*". 1. Activate ATT daemon and remove USB 2. After reboot, wait about 30~40 seconds for sys.skb.hidecert property as 1 3. Go to "비상 설정" 4. Input back key to go "B tv 인증" screen It seems that the UI checks properties when entering the authentication screen. As you mentioned, if binder communication is not possible, adding the above operation in ATT daemon may be a solution without UI modification. Please note it. Thank you. Kim |
|
|
Hi Kim, We have applied a workaround for this issue in BFX-AT100_5.4.2, BFX-AT100_5.4.1, and BFX-UA300_5.4.1. You can refer to the commit "Update the way to trigger am command". And please update AttDaemon.apk (in the usb disk) to version 240430. AttDaemon release 240430 is uploaded to FTP server. (/release_by_fxn/AttDaemon) |
|
|
Hi Bcan, I have tested in BFX-AT100_5.4.2, BFX-AT100_5.4.1, and BFX-UA300_5.4.1 and all branches are works well. 1. Please commit also to BFX-UH200_5.4.1, BFX-AT100_5.4.1_VCS branches. 2. Is it possible to just modify ATTdaemon without changing FW? Because, BFX-UA300_5.4.1 and BFX-AT100_5.4.1_VCS FW was released on field. It will be difficult to re-release FW because of this issue. Therefore, please check whether only ATTDaemon can be changed without changing FW. Thank you. Kim |
|
|
Hi Bcan, HM Solutions is continuing to inquire about this issue. As I mentioned in the comment, I am still inquiring about whether it is possible to modify only the ATT daemon without updating FW. Would it be difficult to add the function that enter and exit another page to the ATT daemon, as I tested above? Thank you. Kim |
|
|
Hi Kim, 1. For BFX-UH200_5.4.1, it works well without this workaround. For BFX-AT100_5.4.1_VCS, project vendor/foxconn refers to BFX-AT100_5.4.1. It's unnecessary to commit to these two branches. 2. For the method you provided, is there any other way (e.g. api?) to trigger page refreshing ? Inputting extra key code is not preferred for high uncertainty of UI. |
|
|
Hi Bcan, 1. It's unnecessary to commit to these two branches. >> Ok. Thank you for support. 2. Inputting extra key code is not preferred for high uncertainty of UI >> As mentioned above, FW has already been released, so we need to find a way to do it temporarily. As I know that there is no Page refreshing API. As an alternative, HM Solution said to add the task of temporarily input extra key through the USER-CONTROL command. But they said, currently USER-CONTROL is not working. Could you please help to check why USER-CONTROL is not working? Thank you. Kim image.png (150,833 bytes) |
|
|
Hi Kim, AttDaemon release 240503 is uploaded to FTP server. (/release_by_fxn/AttDaemon) It adds extra keys to refresh authentication page for BFX-AT100/BFX-UA300. |
|
|
Hi Bcan, Thank you for quick support. On my side, it seems working well. I will check again next week to see if on HM Solution is working properly. For future reference, please also check why the USER-CONTROL command does not work. Thank you. Kim |
|
|
AttDaemon version 240503 is released. |
|
|
Hi Bcan, I received word from HM Solutions that it works well. We plan to operate ATT daemon as follows. BFX-AT100 – 15.541.66 / BFX-UA300 – 19.541.520 -> Use 240503 version BFX-AT100_5.4.2 / BFX-UH200_5.4.1 -> Use 240430 version Thank you for support. Additionally, Did you check why the USER-CONTROL command does not work? There is no problem even if this command is not executed right now, I hope review it in advance for future reference. Thank you. Kim |
- yk.jung ( (ALTech) Younkwang Jung ) developer
.png)
